classifieds - parts and stuff http://www.nissansilvia.com/forums/index.php Sat, 04 Sep 2010 14:49:29 +0000 30 Few unwanted parts http://www.nissansilvia.com/forums/index.php?showtopic=458790
Sr20 Hicas power steer pump-$80
S14 standard radiator good cheap upgrade for ur 13-$100
stainless 3inch dump pipe-$50
Sr20det hollowed out cat-$30

my shed is a mess n there will bbe more shit up for grabs as soon as i finish cleanin up.
Make me sum offers or may swap for parts +cash.

Need T28turbo heat shield, sr20 radiator brackets, silvia battery clamp, alloy rad overflo tank, SR20 spiggot bush thats all i can think of atm. Will update as I get round to it.

Cheers :thumbsup:]]> Sat, 04 Sep 2010 14:49:29 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458790 R33 GTR WHEELS JDM http://www.nissansilvia.com/forums/index.php?showtopic=458789 up for grab here a set of genuine r33 gtr rims

-brought it for my s15 but changed my mind and got another set of Rays meshes

-used for only 3 laps

-exellent conditions!!!!

-17x9+30

-ill let the pics speak for itself

-on one condition, rims will landed here(geelong around 24.9.10 - 15.10.10)

$1350

0423415272

]]> Sat, 04 Sep 2010 14:09:52 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458789 <![CDATA[R32 GTR Non Brembo Caliper Adaptors to increase disk size from 296mm to 324mm & 324mm Brembo Disks]]> http://www.nissansilvia.com/forums/index.php?showtopic=458784
Unique sell an adaptor to go from your standard 280mm disk to 324mm (using the cast iron caliper), but when going on a GTR Aluminium Caliper, they had to mill out a section to clear the hub.

Reason for selling, just bought new set of R888's on 16's, so don't want to spend another $2g's on rims and new rubber.

These bolt straight on and include all the hardware (caliper will need to be machined or filed slightly to fit larger bolt or you can get a smaller bolt) and if Melbourne based, I can throw in a set of 350Z 324mm disks that have been freshly machined and have 29.2mm of meat left of them.

This package cost me:

$350 for standard adaptors
$100 for machining and frieght
$180 for disks

$630


$350 and you can have the lot (pick up only)


Based in Melbourne
0409707054






]]> Sat, 04 Sep 2010 12:51:27 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458784 SEMI-SLIM KAIXEN HID XENON KIT - Inbuilt CANBUS/IGNITOR http://www.nissansilvia.com/forums/index.php?showtopic=458783 Official Kaixen website: www.kaixen.co.kr/en
Australian website coming soon.

THREAD INDEX
1. INFORMATION
2. APPLICATION
3. PRICING
4. PAYMENT



Posted Image

Posted Image
Certified Manufacturer ISO 9001 Quality Certifications: E13, TUV, QS9000, KQA
KAIXEN SEMI-SLIM KITS with inbuilt IGNITORS/CANBUS(European compatibility chip)


24 MONTHS WARRANTY
QUALITY, PRICE, RELIABILITY, INTEGRITY
HIGH QUALITY, 100% KOREAN MADE - INSTALLED AS OEM IN HYUNDAI LUXURY CARS IN KOREA


$235 Including Free Express post!
sorry no pickup
RRP $295

Kaixen Catalog
Posted Image

Posted Image


There has been an increase in re-branded kits with company logos.
These kits may likely be comparable to very cheap kits you see on the market. The extra price you pay will basically cover future replacements for the company. Extra price does NOT mean better quality. We ask you, is extra warranty and savings worth the trouble of the kits failing at crucial times, not to mention time, effort and waiting time for warranty replacements?


Comparable to OEM Phillips and GE HID systems, these kits are 100% OEM made in Korea.
Kaixens HAS the lowest defect rate in the industry at less than 1%!
Infact, Kaixen worked with Philips Korea to produce xenon globes.




1. I N F O R M A T I O N
========================


MAIN FEATURES:
- 2 YEARS FULL WARRANTY
- 100% OEM made in Korea
- 100% Plug & Play
- Low 35watt consumption
- K2 Ballasts (4th Generation Kaixen ballast released late 2007)
- Built-in ‘canceller function’ technology in ballast; compatible with 97% of European cars.
- ISO2001 registered, E13 certified, KQA quality assurance certified.

PARTS:
x2 Bulbs/Burners
x2 Ballasts with inbuilt igniters and Cancellor Function for European cars
x2 Connectors for specific bulb type
x2 20Amps replacement fuses
x2 Zip ties
x2 Double sided Adhesive Pads for ballast
x1 Instruction manual


KAIXEN BRIEF:
Kaixen Hid kits are made by Autoline (founded in 1994) they started to develop and manufacture HID Xenon Lighting Systems for Automobiles from 2001 under the brand name of KAIXEN.
They are the largest manufacturer and exporter in Korea producing all kinds of HID Xenon Lighting Systems using their latest advanced manufacturing line technology. These are now sold in all major countries and
Kaixen HID kits were first sold using Philips/Matshushita ballasts and bulbs. Since then, Kaixen has received their own license as well as hiring several key engineers from Germany to develop its own high quality ballast / bulbs since 2002.

WHAT SETS KAIXEN APART FROM OTHER XENON BRANDS:

- High Quality: Consistent, Accurate, Clear colour temperature and contrast, strict manufacture guidelines
- Reliability: its high quality results in one of the lowest defect rates in the industry, lower than Philips!
- Affordable: Very competitive price for its high quality; Kaixen produces ALL their parts, WE are the distributors knocking off about $50 per kit.
- Integrity: Sold and recognised around the world. Installed in race cars, super cars AND as OEM xenon kits in HYUNDAI luxury Cars in Korea.

- Kaixen is highly Comparable to OEM Philips & GE bulbs. In fact, Kaixen used to supply parts to Philips korea!
- High Quality OEM ballasts, bulbs, wiring, OEM quality fit & finish
- All parts direct from one source, one factory meaning best technological integration and development
- Not re-based parts like expensive Philips kits / Xenon Depot and other 'high-end kits'
- No inferior parts outsourced from poor quality factories (alot from China) THEN Rebranded like MANY kits with high and low price tags
- Many low quality kits market themselves as "German/Japan technology" which really means nothing because they do not define what is the actual' technology.. it can be as little as the igniter timing!
it is really just a cheap way to market their product.
- Igniter left outside the ballast is marketed as 'slim ballast', it is basically a form of marketing. Kaixen ballasts have inbuilt igniters which prevent heat damage.
- Kaixen Quality will only improve, No outsourced parts to cut costs at times of high competition like MANY companies do.

- Autoline has existed since 1994 and continue to provide high quality products for the long term.
- Only other company other than Philips to develop the diamond-cut bulbs (no longer available because Kaixen found them very fragile; Not to worry! Kaixen bulbs are now even better!)




2. A P P L I C A T I O N
=========================

H1 S15, R33/R34, R32 (91+, please check)
H3 R32 (projector style please)
H4 180SX, S14
H7 350Z

S14a
Hi beam - H1
Lo beam - H1

S13
- Dual Square:
Hi/Lo - H4
Fog Lights - H3
- Triple projector:
Low beam - H1
High beam - H3
Fog light - H3
- Double projector:
Low beam - H3
High Beam - H3
Fog light - H3



Posted Image




3. P R I C I N G
================


To order please specify:
1. Single or double kit
2. Bulb type (not sure, email me car model, year, any headlight mods)
3. Colour temperature / Kelvin


BULB TYPES:

H1, H3, H4, H7, HB3, HB4, H9/H11, 9007: $as advertised above
H4 hi/lo: +$60 more than single
D2C Kit: +$15 more than single

Hi/Lo (Double Type Bulbs):
- 9004, 9007, H13, D4C: email for price


COLOUR TEMPERATURE / KELVIN:
DOWNLOAD PICTURES IN ZIP FORMAT

Ranked from most popular:

- 6000K Crystal White - White / Very slight blue tint - Recommended colour

- 8500K Crystal Blue - White / Blue

- 5000K Crystal Natural - White / Very slight Yellow tint

- 6500K Crystal Purple- White / Very slight Purple tint

- 4300K OEM Colour - White / Yellow Colour (+$20)

- 4000K Crystal Yellow - Yellow Fog Colour (+$20)



Kaixen Motorbike Kit - $195 inc Express post.
1 Waterproof Slim Built Ballast with Inbuilt Canceller and ignitor + 1 Bulb + all necessary wires


Individual Parts Pricing:
BULB
- Pair of Bulbs (Single type / D2C) - $87
- Pair of Bulbs (Double H4 hi/lo type) - $147
BALLAST
- 1 Piece Ballast - $87
- 2 Piece Ballast - $165
RELAYS
- For 1 single kit: x2 Relays $25
- For 1 Double Hi/Lo Kit: x2 Relay + x2 Controller $39
The Relay is recommend for special case as follows:
- For unstable lights, due to lack of output power in battery
- Long distance between lights and battery located in trunk.




4. P A Y M E N T
================

- Bank deposit
- PayPal (3% PayPal Fee)
PLEASE EMAIL FOR BANK DETAILS.]]> Sat, 04 Sep 2010 12:39:45 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458783 FS: Vertex S13 rear bar http://www.nissansilvia.com/forums/index.php?showtopic=458782
$180

Brisbane
0401 669 900
Thanks
Jayson

]]> Sat, 04 Sep 2010 12:28:11 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458782 <![CDATA[Radiator Overflow for 180SX (new), 180SX Bonnet (with vent), Rubber Gear Surround with metal plate, Spare Wheel (5 Stud) & Nissan Jack]]> http://www.nissansilvia.com/forums/index.php?showtopic=458781 180SX Bonnet (with vent), $60
Rubber Gear Surround with metal plate $20
Spare Wheel (5 Stud) & Nissan Jack $70
Fuse cover $5

Parts located in Melbourne

0409707054




]]> Sat, 04 Sep 2010 12:24:51 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458781 S13 Silvia rear tail light garnish http://www.nissansilvia.com/forums/index.php?showtopic=458780
$100

Brisbane
0401 669 900
Thanks
Jayson

]]> Sat, 04 Sep 2010 12:24:30 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458780 FS: spoilerless boot lid S13 http://www.nissansilvia.com/forums/index.php?showtopic=458778
$170

Brisbane
0401 669 900
Thanks
Jayson

]]> Sat, 04 Sep 2010 12:21:34 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458778 R33 Full Interior strip http://www.nissansilvia.com/forums/index.php?showtopic=458777 Item: Nissan Skyline R33 - non sunroof interior
Ok, so i have Full R33 Interior & Boot interior, Still in the car, Seats/Dash Surronds/carpets/roof liner/door cards/shifter/heater vents/boot carpet/spare wheel.. THE LOT... Was a street car so it has everything!

Let me know what you want and how much you want to pay Ill check/take a photo and let you know.

PHOTOS OF INTERIOR TO COME, But thought id put a thread up so people can atleast tell me what they want so i can check it aswell :)

Reply in thread/Call/SMS/PM me..
0421 927 250]]> Sat, 04 Sep 2010 12:08:40 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458777 M-sport and vertex! http://www.nissansilvia.com/forums/index.php?showtopic=458772 front bar is painted S14 red was used the car 2 times so is more or less perfect.
same as this:
Posted Image
Price: Viva garage sell these for $289 so looking @ $200bucks for it

Vertex rear bar, same deal pretty much perfect condition, paint stock red aswell
same as this:
Posted Image

Price: $150

cheers,mike]]> Sat, 04 Sep 2010 10:38:08 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458772 kakamoto zorst http://www.nissansilvia.com/forums/index.php?showtopic=458771
im here to get rid of my kakamoto exhaust as i need a standard one as people in my street keep complaning.


basically i dont know if this matters. but its on a nissan 180sx type s, so its a N/A exhaust.

from extractors backwards its a 3inch exhaust with a 4" cannon? i dont know. its kinda bronzeish in colour. has a dint in the cannon as from speed bumps but can easily be fixed at any exhaust shop.

what im looking for is just a standard 2.5inch exhaust system. from extractors to the end. straight swap.


what id like to know also is would a n/a s13 exhaust fit on a n/a 180sx? seing as most of the parts do.


anyway pm me if your interested in swapping!!]]> Sat, 04 Sep 2010 10:36:06 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458771 FS: Pioneer home theatre amp http://www.nissansilvia.com/forums/index.php?showtopic=458768
details below

Pioneer VSX-519

$250

PM or txt 0433443055]]> Sat, 04 Sep 2010 09:50:03 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458768 1993 Honda Integra DC2 Si Vtec http://www.nissansilvia.com/forums/index.php?showtopic=458765
http://www.carsales....s=35&__Qpb=true

Any questions just pm, pretty sure the ad would have most questions answered though. Listing goes for 7.5k, but i am after 6.5k firm. Thanks]]> Sat, 04 Sep 2010 09:31:26 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458765 A31 CEFIRO RB22 RB25 GEARBOX, GOODIES GALORE. http://www.nissansilvia.com/forums/index.php?showtopic=458758
Engine:
-Forged and Stroked Rb22det
-Custom 80mm CP pistons
-Rb26 crank
-H-Beam rb26 rods
-Arp2000 rod bolts
-Arp head stud kit
-Greddy metal head gasket
-Cometic full gasket kit
-Nissan water pump
-Nissan thermostat
-N1 oil pump
-Nissan belt idler
-Nissan belt tensioner
-Nissan timing belt
-King bearing kit
-All block and head machined
-Balanced and blueprinted.
-Hypergear TR43i .63 500hp turbo
-Braided oil Line with speedflow fittings
-Braided Oil drain
-Hypergear 38mm external wastegate
-Highmount SS manifold
-Screamer pipe
-Camtech cams 268's 9mm lift.
-Tomei Type A valve springs
-KLS cam gears
-Nistune ecu.
-Wallbro 600hp fuel pump
-GTR Injectors & resistor pack
-3.5" alloy intake with blitz pod
-Blitz Turnflow intercooler core $200
-Solid 2.5" alloy cooler piping
-Yellow Jacket Coil packs.
-Stainless 3" V band dump/Front pipe
-3” straight pipe with 3" single style bozo tip $300
-Z32 AFM $180
-ASI 42mm rad $100


Drivetrain & Brakes:
-r33 RB25 series II Gearbox $1200 immac condition
-Xtreme Racing Light Flywheel $200
-Xtreme 5 Puk Button clutch $600
-VLNY 4.3 r200 locker $100
-Strengthened handbrake setup
-Project MU handbrake shoes
-Z32 front calipers and rotors $150
-DMAX 5 stud front hubs $100
-R32 rear calipers and rotors $80
-5 stud conversion front and rear
-Ebc Green stuff pads Front and rear

Suspension etc:
-Full Achieve roll cage $700
-JIC Magic Coilovers $500
-Cusco front strut brace $100
-Spats Adjustable rear strut brace. $100
-JJR 30mm front sway bar $100
-JJR 28mm rear sway bar $100
-s14 non hicas steering rack $150 with tie rods etc complete
-High pressure steering hoses & fitting.
-S14 rack ends
-S14 tie rods and ends
-VLNY 6mm rack spacers
-Gktech Alloy steering spacer
-Power Spirit Castor rods $80
-Power Spirit rear camber arms. $80
-Power Spirit rear traction rods.
-Power Spirit Hicas Lock bar.
-Midnight Mods alloy subframe bushes.

Interior:
-Stripped, door trims removed, sound deadening and carpet removed etc.
-Full 6 point Achieve rollcage
-330mm Nardi Classic Tanaguchi Steering Wheel $100
-R32 GTR front seats $400
-Brand new Gizzmo electronic boost controller $150
-Nismo carbon Shift knob $70
-Blitz turbo timer $50
-Apexi Oil temp, Water temp, Boost, Oil pressure gauges $400 with control unit
-Apexi el2 control unit ^
-Madden Dry cell battery
-Weird phone holder thing
-Sony headunit.

Exterior:
-Chrome series 2 grill
-Full respray in 'gtr z tune silver' door jams, under boot/bonnet etc.
-Charcoal MetalliM engine bay.
-Charcoal Metallic interior
-Autech body kit
-Rolled/Pumped guards
-Garden Edging front lip
-M3 Style boot lip $50
-WeeOne Weathersheilds $100
-Jap Roof Wing $200
-6000k Xenon Hid’s
-Stitch Gulfs 3 peice 17x8.5-1 $1400 for the set with tyres
-Stitch Gulfs 3 peice 17x9.5+21
-Direzza dz101's front
-Direzza dz101's rear
-R33 GTR 17x9+30 with 8mm slip on as Spare skid wheels.

Willing to do motor/box package.
$6000 for motor and gearbox with clutch, flywheel, and one peice tailshaft.

Turbo less than 500ks old, with ss manifold 38mm gate and screamer $1000

Once most parts are gone will sell rolling shell for $2000

Complete car ask what you need.

Thanks

Justin]]> Sat, 04 Sep 2010 08:56:44 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458758 Justjap B-pillar floor brace - suit s13.14.15 - $50 http://www.nissansilvia.com/forums/index.php?showtopic=458754
Just jap sell them for $130, excellent condition for $50 pickup!

ARC S15 sr20det induction box - also excellent condition - $350ono

PM or msg 042328432

]]> Sat, 04 Sep 2010 08:21:36 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458754 FS: Crystal S13 tail lights http://www.nissansilvia.com/forums/index.php?showtopic=458748
Price is $200
Located brisbane northside.

0401 669 900

Thanks
Jayson

]]> Sat, 04 Sep 2010 07:56:31 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458748 Parts Parts parts - S13/180sx s14 s15 56k enter at own risk :) http://www.nissansilvia.com/forums/index.php?showtopic=458747
$1200 ono


-Rebuilt SR20 auto ($3100 of recipts) 20,000 old still in car so happy to demo

$1000ono


-S13 Front end (good for sil80 conversion)with Geninuine URAS body kit, clear headlight, clear parkers, gtr style grille, 15mm widebody front quarder, bonnet and hanges all brackets ready to bolt up in gun metal grey

$1500ono


-Built SR20 with recepts for 8k first build and 6k second build (all parts listed on recipts in pics)you can also have wiring loom and comp if needed still in car so can demo that its perfect

$2500ono


-S15 Seats good condision only a very small ciggy burn on LHS seat base

$500 ono


-BLITZ Intercooler kit 600x300x70

$650FIRM


-17" white 4stud wheels 7.5 wide and +38 offset (good fitment for stock s13 or 180) with near new hancook tyres

$600ono


-S13 Doors (driver and passager) both perfict working order full electrics mirriors and door skins

-$200each ono


-Pro gauges (2 gauges in cabin fiber looking piller mount)

$50ono


-Autometer Boost gauge (mech)

$80ono


-Cadence VXC6KIT 6.5" splits

$100ono


-JBL 6.5" coax

$60ono

]]> Sat, 04 Sep 2010 07:43:17 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458747 Parts Cleanout - S13/180sx s14 s15 http://www.nissansilvia.com/forums/index.php?showtopic=458743 Type X front seats - $150pair
Excellent condition no rips tears or worn areas, just little dusty
Posted Image Posted Image
Type X left door trim - $30
Good condition but could do with a clean.
Posted Image
Type X glove box - $20
Good condition but could do with a clean.
Posted Image
Type x digital climate control - $40
no loom, in perfect working condition when removed
Posted Image
Type x cluster - $30
Front plastic has been damaged by heat but works perfect just needs a new front plastic, no loom
Posted Image
Adm s15 cluster x3 - $50 each
Two in great condition, one has piece missing from front plastic shown in pics, no looms included
Unknown kms on the good condition ones but the damaged one has 22xxxkms on it.
Posted Image Posted Image
180sx/s13 cluster - $30
Good condition just dusty shows 59xxx kms, no loom included
Posted Image
180/s13 overflow bottle - $10
No cracks or damage
Posted Image
S13 passenger seat - $20
Re-trimmed in tan leather and suede
Posted Image
S13 fiberglass 50mm rear quarters $100
Never fitted to a car but left hand one has slight crack on wheel arch shown in pics
Posted Image Posted Image
S15 tail lights - $50pair
Chipped in corners shown in pics
Posted Image Posted Image
S14 coilpacks - $50set
Came from series 2 s14 with 120000kms on the clock
Posted Image
Impul rs rims 16x7 +32 16x8 +32 - $400
All gutter rash repaired centres freshly powder coated gunmetal, includes centre caps, No tyres.
Posted Image Posted Image Posted Image
Desmond longchamp xrv rims 16x7 +35 16x8 +25 - $400
Centres painted black lips are polished with slight gutter rash. Have tyres almost new 205 on the front and 225 on the rear
Posted Image Posted Image
4 stud space saver 4x114.3 - $30
brand new never used just dirty as hell
Posted Image

All prices are negotiable, need to get rid of this stuff
All parts located in sydneys west, will post at buyers expense
pm, call or sms - Rusty 0410 179 371 (if i dont answer leave a msg as im prob at work)]]> Sat, 04 Sep 2010 06:22:25 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458743 FS: GT3082 garrett turbo. 0.82 ex http://www.nissansilvia.com/forums/index.php?showtopic=458738
Its in excellent condition with virtually no shaft play in any direction. Around 20,000km use

Has 0.82 external gated exhaust housing

Note there is a bit of water on the exhaust housing from when I removed it from the car

$1100

Posted Image
Posted Image
Posted Image]]> Sat, 04 Sep 2010 05:35:34 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458738 FS: GT30 Exhaust housings http://www.nissansilvia.com/forums/index.php?showtopic=458737
The first one is an external gate 0.82 T3 housing, with a pipe welded on for external gate. This was done by ETM. Excellent condition

$400

Posted Image
Posted Image
Posted Image
Posted Image


The second one is a R33 stock housing machined to suit any of the above GT30 cores. This housing makes life easy for people not wanting to modify their dump pipe and stuff.

$175

Posted Image
Posted Image]]> Sat, 04 Sep 2010 05:30:07 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458737 2x almost new 205/50/16 kumhos $90 http://www.nissansilvia.com/forums/index.php?showtopic=458732
Have only done a few thousand kms and still have around 90% tread or more, as you can see from pics.

Pick up from Brisbane Jindalee area

Thanks
Matt
0401 216 234

Posted Image
Posted Image]]> Sat, 04 Sep 2010 04:40:38 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458732 <![CDATA[S14 & SR Parts for sale.]]> http://www.nissansilvia.com/forums/index.php?showtopic=458730




S14 Nismo Lightened Flywheel. Mint.

s14 Nismo Copper Mix Clutch Kit.
Used Maybe 40% if that.

$700 ono.

Flywheel $400
Clutch Kit $350



Fmic Core.
600x300x75

$150


S13 2.3/4 Cat Back.

Mild Steel
RSR 3" Cannon.

Front pipe to suit.
extra $50.

$250


S14 Sr20det Radiator.
40mm thick.
with mounts for s13.

$80



S14 Sr20det Gearbox.

120,000kms.

good nick.
with crossmember and shifter.

$550 ono.
can supply start up warranty..



S14 Clutch Master Cyl.

$80



S14 BM44 BMC with Booster.

$120



S14 Clutch Pedal.
S14 Brake Pedal.

$100 the pair.




S13 180sx Shell with rego.
My link


Trust TD06-17C turbo Kit.
550cc Injectors + custom Alloy rail.
My link



PICS UP MONDAY.


All parts located in wingfield s.a

inspections welcome.

cheers ben.]]> Sat, 04 Sep 2010 04:34:06 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458730 S13/180 parts clearout/ garage sale http://www.nissansilvia.com/forums/index.php?showtopic=458726
Lets get rid of this stuff guys

Auto SR20 Parts -$5 For the lot
- Hardlines
- Gearbox crossmember
Resized to 38% (was 2560 x 1920) - Click image to enlarge Resized to 38% (was 2560 x 1920) - Click image to enlarge Resized to 38% (was 2560 x 1920) - Click image to enlargePosted Image

2 x Manual SR20DE Looms 100% -$50 each
[URL=http://img804.imageshack.us/i/p7240012.jpg/] Resized to 38% (was 2560 x 1920) - Click image to enlarge Resized to 38% (was 2560 x 1920) - Click image to enlarge Resized to 38% (was 2560 x 1920) - Click image to enlargePosted Image[/URL]


General SR20 Parts -$20 for the lot!!!
- Exhaust front pipe or $5
- Clutch bracket or $5
- Engine mount or $5
- SR20DET intake pipe or $5
- BM33 (Brake Master Cylinder) or $5
- bits n pieces
Resized to 38% (was 2560 x 1920) - Click image to enlarge Resized to 38% (was 2560 x 1920) - Click image to enlarge Resized to 38% (was 2560 x 1920) - Click image to enlargePosted Image

S13 Boot Lid + Spoiler -$40
Resized to 38% (was 2560 x 1920) - Click image to enlarge Resized to 38% (was 2560 x 1920) - Click image to enlarge Resized to 38% (was 2560 x 1920) - Click image to enlargePosted Image

Resized to 38% (was 2560 x 1920) - Click image to enlarge Resized to 38% (was 2560 x 1920) - Click image to enlarge Resized to 38% (was 2560 x 1920) - Click image to enlargePosted Image
S13 Rotors, Fronts and Rear (just passed RWC with them) $100

Manual SR20 Flywheel $25

Will Post Decent Sized Items Nationally!!]]> Sat, 04 Sep 2010 04:11:26 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458726 Genuine Nissan S13/180SX Gear Boot http://www.nissansilvia.com/forums/index.php?showtopic=458722
I have a brand new condition genuine Nissan gear boot to suit s13/180sx that I got off TAARK (great bloke and CHEAPEST genuine Nissan parts you'll get, currently selling for $80 - excuse the plug lol) a while back, but swapped it out after test fitting it for a custom seude one. I have no need for it so here it is ^_^

Posted Image Posted Image Posted Image

As you can see by the pictures, it's pretty much brand spankin. Only thing you don't get it the box and plastic bag it's covered in, that you would get brand new...

I'm after $40 delivered via Express Post to anywhere in Australia! Or you can pay an extra $40 for the box and plastic bag :lol:

Shoot me a pm for any interest!

Cheers,

Andy]]> Sat, 04 Sep 2010 03:54:06 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458722 N97 and samsung ultra touch http://www.nissansilvia.com/forums/index.php?showtopic=458717 also selling a samsung ultra touch in box wtih all books $200

0433440377]]> Sat, 04 Sep 2010 03:24:03 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458717 Series 4 rx7 series 4 turbo http://www.nissansilvia.com/forums/index.php?showtopic=458716 Item Condition: Imac ran flat 12 second pass with this turbo in my ae86
Price and price conditions: $150
Extra Info: comes with actuator
Pictures:you all no what it looms like
Contact Details:Troy 0431542900
Location:gisborne south
Delivery & Conditions of Delivery:pick up only]]> Sat, 04 Sep 2010 03:12:31 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458716 S14a APEXI Power FC (new) + other parts http://www.nissansilvia.com/forums/index.php?showtopic=458715 For sale: APEXI Power FC with hand controller.
Condition: Brand new in box
Suits: 200sx s14a (series 2)
Reason for selling: Changed my mind about ECU setup.
Price: $1150


For sale: Z32 air flow meter, with plug
Condition: Good, mesh is in tact both sides
Suits: s13/180/s14/s14a/s15 (upgrade AFM)
Reason for selling: not needed
Price: $230 delivered, $220 pickup


For sale: Genuine Ganador super mirrors, blue lens (best one)
Condition: Very good, few minor marks. Painted pearl white.
Suits: 200sx series 1 or series 2
Reason for selling: not needed
Price: $370


For sale: s14a rear tail lights + center garnish
Condition: Very good, no cracks or damage
Suits: 200sx series 1 or series 2 (upgrade the ugly zenki tail lights)
Reason for selling: not needed
Price: $200


For sale: R33 GTSt rear brakes (calipers and rotors)
Condition: used, still meat on the pads
Suits: Skyline, stagea, or upgrade for s13/s14/s15 rears
Reason for selling: not needed
Price: $250

All parts in Melbourne. Email got_b00st@hotmail.com or PM]]> Sat, 04 Sep 2010 03:07:49 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458715 FS: S13/180sx Glovebox, Centre Console Box http://www.nissansilvia.com/forums/index.php?showtopic=458714
1. S13/180sx glove box - $30
Posted Image


2. S13/180sx Centre console - $50
Posted Image


No idea what these are worth, so feel free to make some offers

thanks
steve
0422 189 151]]> Sat, 04 Sep 2010 03:06:47 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458714 Z32 rear 5 stud Hubs http://www.nissansilvia.com/forums/index.php?showtopic=458708 you all no what they fit
$180 firm
I'm from gisborne south Victoria
the NAme is Troy 0431542900


I also have all z32 rear ends parts minus brakes

If ur around western suburbs possible I can drop of]]> Sat, 04 Sep 2010 02:29:29 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458708 <![CDATA[245 45 17's 70%]]> http://www.nissansilvia.com/forums/index.php?showtopic=458707 99w
Treadwear 360
Traction AA
Temperature A

70% tread life.
Hard compound good for long life.
Bugger all inner camber wear.
Decent brand but will get pix and specifics up asap.
Located Sth East burbs
$80]]> Sat, 04 Sep 2010 02:18:57 +0000 http://www.nissansilvia.com/forums/index.php?showtopic=458707